Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- offen:pslabv6 [2024/08/29 20:19] – itbs
+++ offen:pslabv6 [2024/08/29 20:24] (aktuell) – itbs
@@ Zeile 1: / Zeile 1: @@
+x Pocket Science Lab
+====== Specification ======
+  * Battery for clock
+  * SD card
+  * More connections
+  * Circuitpython
+  * 4-Channel up to 2MSPS Oscilloscope. Software selectable amplification stages
+  * 12-bit Voltmeter with programmable gain. Input ranges from +/-10 mV to +/-16 V
+  * 3x 12-bit Programmable voltage sources +/-3.3 V,+/-5V,0-3 V
+  * 12-bit Programmable current source. 0-3.3 mA
+  * Supports Advanced Plugins/Add-on Modules
+  * 4-Channel, 4 MHz, Logic Analyzer
+  * 2x Sine/Triangular wave generators. 5 Hz to 5 KHz. Manual amplitude control for SI1
+  * 4x PWM generators. 15 nS resolution. Up to 8 MHz
+  * Capacitance Measurement. pF to uF range
+  * I2C, SPI, UART data buses for Accel/gyros/humidity/temperature modules etc.
+===== Features List =====
+==== Oscilloscopes ====
+{{ :offen:pinout_pslabv6.png?400|}}
+One of the main features of PSLab is the 4-channel Oscilloscope which can monitor analog inputs at maximum of 2 million samples per second. It includes controls such as triggering, and gain selection. Uses Python-Scipy for curve fitting.
+==== Waveform Generators ====
+  * SI1 : 5 Hz – 5 KHz arbitrary waveform generator. Manual amplitude control up to +/-3 Volts
+  * SI2 : 5 Hz – 5 KHz arbitrary waveform generator. Amplitude of +/-3 Volts. Attenuable via software
+  * SQx : There are four phase correlated PWM outputs with maximum frequency 32 MHz, 15 nano second duty cycle, and phase difference control.
+==== Measurement Functions ====
+  * Frequency counter tested up to 16 MHz.
+  * Capacitance Measurement. pF to uF range
+  * PSLab has several 12-bit analog inputs (function as voltmeters) with programmable gains, and maximum ranges varying from +/-5 mV to +/-16 V.
+==== Voltage and Current Sources ====
+  * 12-bit Constant Current source. Maximum current 3.3 mA (subject to load resistance).
+  * PSLab has three 12-bit Programmable voltage sources +/-3.3 V,+/-5 V,0-3 V. (PV1, PV2, PV3) controls
+==== Other useful tools ====
+  * 4MHz, 4-channel Logic analyzer with 15 nS resolution.Voltage and Current Sources
+  * SPI, I2C, UART outputs
+  * Graphical Interfaces for Oscilloscope, Logic Analyser, streaming data, wireless acquisition and several experiments developed that use a common framework which drastically reduces code required to incorporate control and plotting widgets.
+  * PSLab also has space for an ESP-12 module for WiFi access with access point/ station mode.
+{{ :offen:pslabv2a.png?200|}}
+==== Advanced Controls ====
+  - Advanced Controls with Oscilloscope
+  - Data Logger
+  - Logic Analyzer